cover
cover

BNPC10 Pressure Core

BNPC10 silicon piezoresistive pressure core is the core part of pressure sensor and pressure transmitter, as a high performance pressure sensitive element, it can be easily amplified and assembled into standard signal output transmitter.

PC10 core body is diffused silicon pressure sensitive chip packages to the 316 l stainless steel shell, plus pressure by sealed inside stainless steel diaphragm, silicone oil, is passed on to the sensitive chip sensitive chips don't direct contact with the measured medium, pressure measurement of all solid state structure, so the product can be applied to various occasions, including harsh corrosive medium environment.

The PC10 core is pressure sealed with fluororubber "O" ring for easy installation.

The company can also according to the needs of users, to undertake special requirements of sensors, such as all welded structure, wide temperature compensation, high reliability, strong impact resistance and vibration resistance of pressure sensors, especially for national defense equipment supporting.

Features:

1. Constant current/constant voltage excitation

2. High reliable imported pressure chip

3. Wide temperature compensation

4. Constant voltage compensation can realize integrated output

5.Compensation board irrigation glue, excellent moisture resistance

6.19 mm standard OEM Φ pressure sensitive element

7.Tantalum film and ha 'ite alloy C structure are optional

8.High performance, all solid state, high reliability

9.18-month warranty period

Electrical performance index

Scale   range-100kPa~0~10KPa…2.5Mpa
Pressure   typeGauge pressure, absolute pressure, sealing pressure
Power   supplyConstant current is recommended at 1.5mA;10V is   recommended at constant pressure
Input impedanceConstant current: 2kΩ~5kΩ
Constant pressure: 3   k Ω ~ 18 k Ω
Electrical connectionsGold plated kovar pin or silicone soft lead
Compensated temperature rangeConstant current: 0℃ ~ 60℃ (≤35kPa), -10℃ ~ 70℃   (other range);Constant pressure: -20℃ ~ 85℃
Operating temperature range-45~125℃
Storage temperature range-40~125℃    
Insulation resistance≥ 250Ω/250VDC  
Response time≤1ms(Rise to 90%FS)
Pressure mediumAll liquids and gases compatible with 316L
Mechanical vibration20g(20-5000HZ)
Impact100g(10ms)
Service life10×106 (cycles)
Structural   performance index
Diaphragm materialStainless steel316L
Shell materialStainless steel316L
Perfusion liquidSilicone oil
Sealing ringCyanogen butadiene or fluoro rubber


  
Copyright @banning 2024. All rights reserved.